処女の最初のセックス

	What is the difference between Tool Setter S-50 and M-50?
	The base part of the M-50 is a magnet. It will not fall even if it is attached to the side of the workpiece. It can also be measured with a horizontal machining center. There is the same magnetic force as the weight of the main body.
	You can measure the cutting edge on the flat part of NC lathe, CNC lathe, scroll chuck of turning center. The plane of the scroll chuck is finished within 1/100 mm.
	S-50 has no magnet. If the workpiece is steel, you need to carefully wipe the base part of M-50, but S-50 makes it is not attach iron powder.
	Products that are relevant to this question is as follows. It will jump to the corresponding page by clicking. [Tool setter]

A professional manufacturer of three-dimensional measuring devices for the on-machine measurement and in-flight measurement