処女の最初のセックス

Q1：　Difference between "external contact type" of "internal contact type"?
Q2：　What is the "repeatability"?
Q3：　Is it can be mounted other than the standard stylus? Please tell us also about the length or
　　　　size.
Q4：　What is the Waterproof IP67 (IEC standard)?
Q5：　Please tell me the difference between general stylus (steel stylus, etc.) and "non-magnetic
　　　　stylus".
Q6：　Differences in non-ferrous metal and non-metal? Also, I use external contact type (energized
　　　　type)?
Q7：　What is the "centering"?
Q8：　It has been described as W6 and W4 centering gauge, but what do you thing?
Q9：　What does it mean the machine tools is the magnetization?
Q10：　Where centering gauge swing type and point finder Do you difference?
Q11：　Can I redeem yourself with the stylus?
Q12：　I'd like to adjust the stylus.
Q13：　Why repeat accuracy is do you a world?
Q14：　Why do I need to repeat accuracy?
Q15：　I want to measure the length of the drill of φ0.05 tool setter, but either of i-50 and
　　　　　M-50 is good?
Q16：　The cutting edge measurement of the end mill of φ6mm, both of i-50 and M-50 or is a good
　　　　　tool setter?
Q17：　Where What is the difference between i-50 and M-50 of the tool setter?
Q18：　What is difference of M-50 and S-50 of the tool setter?
Q19：　You are using both of the conduction equation with the dial-a tool setter, but why dimensions
　　　　　of different areas?
Q20：　Can I use the viewfinder point the machine tools of horizontal?
Q21：　Is there more than 10 degrees the temperature of the day and evening and the morning, but
　　　　　do not affect the processing and measurement?
Q22：　Machine or does not wear electric field energized expression because flow electricity to the
　　　　　machine?
Q23：　I measure the casting. It is a brass such as aluminum or iron or. There is that I am using
　　　　　energized electric flows, but not stick sometimes. Why?
Q24：　Can I use a leave was put into the ATC waterproof?
Q25：　The battery does not have a year.
Q26：　Can I use a horizontal the machine tools Rotary Center?
Q27：　I'd like to buy a lithium battery at overseas.
Q28：　We want to control the machine of your own, but do you take the signal from the point
　　　　　finder?
Q29：　The stylus of the case, "Using other than our products will be patent infringement"
　　　　　There is a poster with. I will question.
Q30：　Is it possible to measure the exact angle of the gradient loose and tight gradient.
Q31：　Align the vernier to use to sign vice in mold parts processing and has been accurately
　　　　　measured.
Q32：　Or the tip of the stylus would not it be best cylindrical shape than a sphere?
Q33：　From three-point coordinates of the outline rounded surface of the template of radius
　　　　　r and center x, I want to measure the y coordinate.
Q34：　I will tracking the three-dimensional processing curved surface at the point file fin
　　　　　ers. Figure I want to express in a three-dimensional manner.

	Difference between "external contact type" of "internal contact type"? Are there any precautions when buying?
	Big difference, If the measurement object is made of metal and non-ferrous metals "external contact type", It becomes "internal contact type" in the case of non-metal, such as wood and plastic. This means that measuring instrument that can be used in measured is whether or not some of the electrical conductivity is different.
	External contact type 　 Merit：　　Can be measured with high precision at low 　　　　　　　cost. Demerit：It not be measured rusty metal or plastic 　　　　　　　wood. 　　　　　　　Need the magnet cable the ceramic spindle. [Basic principle of external contact type point finder] Machine are made of metal. Metal can be made to flow current. Weak current flows to the work It install a point finder to the main shaft, (-) will be charged. Mandrel so we charged (+), LED will light this touches the work. [Point finder (PTN, PTC, WP type), centering gauge Swing type (NM type)] Is, it becomes the place where this has left radius of the stylus from work. You can measure and centering with an accuracy of 1 / 1000mm If radius of correction. [Tool Setter (M-50, S-50, S-100 type)] The cutting edge is coming in at a distance of 100mm or 50mm than work. If you press the start button here, the tool length is offset input tool setter. 　 It should be noted that if ALC, such as DLC also can not be measured by an external contact method is coating of the end mill. If you are not sure whether internal or external contact at the time of purchase, please confirm to us once.
	Internal contact type [Point finder] Merit：　　Such as non-metallic 　　　　　　　products wood, plastic, 　　　　　　　any material also can 　　　　　　　measure. Demerit： Error of "rice ball type" 　　　　　　　comes out. 　　　　　　　Time lag due to the 　　　　　　　deflection of the 　　　　　　　stylus results. 　　　　　　　Expensive than 　　　　　　　external contact type.
	[Basic principle of internal contact type point finder] 　 Internal contact type in three fulcrum structure, is a scheme that can be measured fulcrum is disengaged when the stylus touches the work. Time lag due to the deflection of the stylus will occur at that time. [Tool Setter (i-50)] Time lag and the error does not come out. If you press the start button in processing the LED lights, tool length is entered in the offset.
	Products that are relevant to this question is as follows. It will jump to the corresponding page by clicking. [Point Finder Series]　　[Tool Setter Series]